ABSTRACT:
Cascaded H-bridge converter has been widely
used and researched in industry, since it is suitable for the operation under
both normal and fault conditions. This paper proposes a novel PWM strategy
based on state transition for cascaded H-Bridge inverter with unbalanced DC
sources to achieve high quality line-to-line output voltages and maximize the
linear modulation range. In this modulation strategy, the duration time of each
switching state will be modified directly through the correction value. Ranges
of correction value are derived by analyzing the modulation index limitation.
Then, proper correction value is added into duration times to transform the
switching states and extend modulation index to the maximum value. Meanwhile,
balanced AC currents can be obtained under unbalanced DC sources condition,
even under larger unbalanced coefficients. Furthermore, a three-phase power
control algorithm (PCA) is introduced to achieve the balanced distribution of
three-phase power. Compared with the traditional zero-sequence voltage
injection method, the proposed strategy is more convenient and effective
theoretically, and it can be applied to the higher-level cascaded H-bridge
converter. The advantage and effectiveness of the proposed strategy are
verified by simulation and experiment results.
KEYWORDS:
1. State transition
2. Linear modulation range
3. Unbalanced DC sources
4. Power control algorithm
SOFTWARE: MATLAB/SIMULINK
CONCLUSION:
A novel PWM strategy based on state transition for CHBI with unbalanced DC sources has been proposed in this paper. Compared with ZSVIM and NVM, the duration times of each switch states can be modified directly by correction value and the gate signals can be acquired easily through ST-PWM. To acquire the maximum linear modulation index, the reason of the modulation index limitation and the novel modulation strategy based on the state transition are studied. The proposed strategy can achieve high quality line-to-line output voltages and extend the modulation range as high as possible. Besides, the three-phase power control algorithm is introduced to acquire balanced power distribution. The effectiveness has been verified by simulation and experiment results.
In our current work, we incorporate PCA
into the ST-PWM strategy, which is a prototype of multi-objective control.
Since both modulation index extension and power control are achieved by
adjusting ΔT, there is a conflict on the control objectives. That is to
say, the control ability of PCA will decrease when the modulation index is
extended. However, we have not yet found a strict mathematical relationship
between them due to time constraints. And we will do a further research on
multi-objective optimal PWM strategy and multi-objective control boundaries
under unbalanced dc sources in the future.
REFERENCES:
[1] A. Marzoughi, R. Burgos, D. Boroyevich, and Y. Xue, "Investigation and comparison of cascaded H-bridge and modular multilevel converter topologies for medium-voltage drive application," in Industrial Electronics Society, IECON 2014 - 40th Annual Conference of the IEEE, 2014, pp. 1562-1568.
[2] S. Kouro, M. Malinowski, K. Gopakumar, J. Pou, L. G. Franquelo, B. Wu, et al., "Recent Advances and Industrial Applications of Multilevel Converters," IEEE Trans. Ind. Electron., vol. 57, no. 8, pp. 2553-2580, Aug. 2010.
[3] X. Zha, L. Xiong, J. Gong and F. Liu, "Cascaded multilevel converter for medium-voltage motor drive capable of regenerating with part of cells," IET Power Electronics, vol. 7, no. 5, pp. 1313-1320, May. 2014.
[4] G. Farivar, C. D. Townsend, B. Hredzak, J. Pou, and V. G. Agelidis, "Low-capacitance cascaded H-bridge multilevel StatCom," IEEE Trans. Power Electron., vol. 32, no. 3, pp. 744-1754, Mar. 2017.
[5] K. D. Teryima, G. Y. Nentawe, and A.
O. David, "A Overlapping Carrier Based SPWM for a 5-Level Cascaded
H-bridge Multilevel Inverter," International Journal of Power
Electronics and Drive Systems (IJPEDS), vol. 7, no. 2, pp. 349-357, 2016.
